home · testimonials · search · checkout · contact  
    For phone purchases call between 10:00am - 5:00pm EST M-F: 1-770-719-2068
  NAVIGATION    

· air cleaners · car covers · corvette C5 ID plate · emblems · emblem tape · fender mats · filterMAG · keychains · mercury marauder products · protect-a-mat · rubber weather mats · steering wheel covers · sunshades · trunk lid cover · TTA intercooler shroud · underhood insulators ·

 
Shopping cart  Shopping cart
0 Product(s) in cart
Total $0.00
> Checkout
 

Please click on a category to view products.
 

Home » Exterior Items » All Products

Air Cleaners

Air Cleaners

Supplies limited for our one-of-a-kind NOS chrome air cleaners for carbureted Buick, Oldsmobile and Pontiac cars that have a 5 1/8 inch neck opening. This is a brand new item in its original GM Box. Long discontinued and hard to find. Perfect NEW condition.
 

Car Care

Car Care

CAR Motorsports is pleased to offer you the following premium quality car care products for cleaning and detailing your car or truck. We are also pleased to offer our complete line of Awesome car detailing products.  The “Awesome” name was chosen to reflect the word most used by consumers testing this line of products.  After years of testing and comparing products, we now have products that are the best in their respective categories.  After much discussion, we decided to name the entire product line consistent with our customers’ reactions.  We now give you our Awesome line of automotive cleaning and detail products. 
 

Filter Mag

Filter Mag

FACT: Metal particles of any size cause engine wear. 

SAE Studies Show 70% wear reduction when metal particles 15-Micron and larger are removed. A huge increase in wear reduction is anticipated at the 2-Micron Level. The PROBLEM, however, is that oil filters can't and don't trap and stop metal contaminates of this size. If you're serious about better performance, longer engine life and protecting your engine's vital components, you need a FilterMAG today!

 

Emblems

Emblems

All emblems on these cars have been painstakingly reproduced to exactly duplicate the originals. The quality of these reproduction emblems is stunning. In fact, our reproductions are too perfect in that they do not have the flaws and color variations found in the factory original emblems. These flaws were due to the manufacturing process, which involved the hand crafting of the emblems by a small custom jewelry maker. Our emblems have no flaws and the color is consistent among all emblems, as well as each emblem itself.
 

Grille Tech

Grille Tech

Grille-Tech grilles offer PROTECTION for your vehicle

  • Protects your radiator from road debris and bugs
  • Protects intercoolers on turbo equipped vehicles
  • Protects other vital engine components



  •  

    Car Covers

    Car Covers

    These are the FIRST and ONLY fully GM Licensed embroidered car covers for the Trans Am, Turbo Trans Am, GTA, Firebird, and Grand Nationals. Both the car cover and the embroidery are GM Licensed. These covers are made from a new, uv resistant, space age designed material. A material far more advanced in design than any other material ever made. There are SEVERAL reasons why a CAR Motorsports Trans Am cover is the best: EXTREMELY lightweight and yet rated Storm Proof as to level of protection. 150 Denier woven polyester material coated with aluminized polyurethane and acrylic. Soft and non-abrasive to clear coat finishes. WILL NOT absorb water like some perforated covers (Evolution 4, etc.). Nearly waterproof, but breathable. Also provides excellent protection from harmful ultraviolet rays. Custom cut mirror pockets. Eyelets for locking cable. Snug fit all the way around. Long and low coverage to keep the wheels clean. The CAR Motorsports TTA cover is also a great value because it comes with: Lifetime Warranty. Yes, Lifetime. No one else has a Lifetime Warranty cover. Licensed EMBROIDERED GM 20th Anniversary Trans Am LOGO! Storage bag INCLUDED! Cable and lock INCLUDED!
     

    Brake Pads and Rotors

    Brake Pads and Rotors

    The first step to improved braking performance is our advanced design OEM approved rotors. We start with the highest quality forged steel OE application rotors from Canada and Italy (Brembo). Each rotor is then studied and tested to ensure that surface quality, vent design, and finished surfaces meet or exceed our strict standards. Next, the rotors are precisely machined using CNC machines and the appropriate computer designed pattern to ensure that the highest consistent quality machining can be achieved. We offer two unique and different rotor patterns to fit - Cross Drilled and Slotted Rotors or Diamond Slotted.
     

    TTA Cooling Hoses

    TTA Cooling Hoses

    Replacement 1989 Pontiac Turbo Trans Am Cooling System Hoses
     

    License Plate Screws

    License Plate Screws

    For license plates, all we saw available in the market were little “pop on” caps that covered up the screw head. When the time comes to install a new license plate, you have to pop off the cap, which is almost impossible without damaging the cap. So, back to the drawing board we went where it was decided that an actual replacement screw should be provided with the logos on the top of this screw. The screw is designed to be installed by hand or with pliers rather than with a screwdriver and features a checked grip. Again, nickel plated brass materials and design ensure a long lasting, beautiful product.
     

    Underhood Insulators

    Underhood Insulators

    The CAR Motorsports Custom Embroidered Underhood Insulator is made using the original OEM insulator to ensure a PERFECT and CORRECT pattern and fit. We feature German Madera Thread in all our LOGO Embroidery Work. The exactness and quality of our digitization is unparalleled, always producing a superior embroidered appearance. Our insulator is purposefully engineered, designed, and constructed to be BETTER than the original insulator. As those familiar with those insulators know, they are made of a material that is very much like roll insulation, only slightly more rigid. THEY are VERY FRAGILE and DO NOT LAST. In fact, those insulators have a tendency to disintegrate and come apart VERY EARLY and VERY EASILY. We use a special glue designed to operate at and withstand EXTREME HEAT. It is a special order glue specifically designed for this purpose. Whenever possible, CAR Motorsports utilizes a flat, lightweight and more rigid board material that is TOTALLY WATER RESISTANT, FLAME RETARDANT, and withstands intense HEAT. This board material allows for better adherence of the embroidered material, smoother and cleaner appearance, better fit, no disintegration, and is cleanable using standard degreasers and a water hose. CAR Motorsports insulator wraping material offers factory thermal protection and is non-flammable and heat resistant to well over 300 degrees. The material we use is heat resistant and non-flammable (BUT IT WILL MELT IF IT COMES INTO DIRECT CONTACT WITH HOTMETAL, such as a HEADER pipe or intake manifold. This material is resistant to all automotive fluids and can be easily cleaned with standard degreasers and water. Installation is a snap...NO DIFFERENT than installing an original insulator. In fact, we include a complete set of new pop in clips to safely and securely fasten the insulator to your hood. These clips are FAR SUPERIOR to the original OEM clips. Simply press our clips into the original OEM mounting positions, and you have an outstandingly secure Custom Embroidered Underhood Insulator. We also offer the option of securing your embroidered insulator utililizing provided Industrial Strength Velcro. This option is for those customers that prefer a completely smooth embroidered insulator. Unlike the original factory insulators which are fragile and deteriorate quickly, our insulator is DESIGNED TO LAST. Please contact us if you have any questions. Features include: • Lightweight, waterproof and flame retardant insulator board material (where applicable). • OEM approved material that is resistant to most chemicals and all automotive fluids. The material has high non-flammability and heat resistant features with a temperature rating of well over 300 degrees Fahrenheit. • Precision cut to exactly duplicate the factory insulator pattern including all pre-drilled mounting holes, cutouts (for ram air equipment, vents, and lights), and notches to ensure a PERFECT fit. • Special extreme heat resistant glue is used to ensure adhesion of embroidered material to the insulation board and remain unaffected from exposure to engine heat. • New high performance superior quality fastening (mounting) tabs are included to ensure that the hood insulator is securely fastened and stays in place. • LARGE, exceptional quality embroidery utilizing imported German threads for maximum durability, color, and heat resistance to over 300 degrees. • Embroidery matches all of our other embroidered products for a seamless, integrated appearance. No mismatched embroidery or logos. • Logos may be custom ordered in any color combination. When you buy a CAR Motorsports product, you can be confident that it represents the best engineered and highest quality product of its type. WARNING CAR Motorsports Under Hood Insulators are designed for factory (unmodified) vehicles. If your car has chromed engine parts, your insulator could be damaged by prolonged exposure to the sun. Scientific experiments utilizing mirrors and geometric and mathematical principles have confirmed that sunlight can be refracted and reflected to produce intense heat of 450 to 750 degrees Farenheit, and in some cases up to 1100 degrees Farenheit. Our product withstands temperatures in excess of 300 degrees, but temperatures above this will damage our insulator product by scoring it with heat marks. The results may not be nearly as dramatic or entertaining as the story of Archimedes, but his basic principles are confirmed. High polished aluminum and chrome, which are highly reflective surfaces, can achieve the same results as mirrors. Depending on the part chromed and its angles, the reflected light is also being refracted (bent) with the combination producing greater temperatures that reflected light only. We are not responsible for any heat/light damage resulting from the installation of this product on a car with chrome or high polished aluminum engine parts.