Z51 emblems now available in two options. Brushed aluminum finish with all Black Z51 or a Torch Red Z with Black 51. Emblems attach using 3M double sided acrylic foam tape for maximum strength. Emblems are 5 inches long, .75 inches tall at the straight edges, and 1 inch tall at the highest point of the Oval. Installation instructions are provided below to aid you in your application of our premium quality emblems to your C5 Corvette's clearcoat paint finish.

Remove any previously applied emblems using a hair dryer and fishing line/dental floss. Adhesive that remains on the paint may be removed with either 3M Brand Adhesive Remover or WD-40 and a soft cloth. Clean the surface with a few drops of grease-cutting liquid detergent in water (do not use a petroleum base cleaner). Rinse clean with fresh water then dry with a lint-free cloth. Wiping surface with denatured alcohol will also help remove any contamination and enhance the adhesion process. Place a protective padded towel or rubber mat under the location you plan to work so if you inadvertently drop the emblem, no damage will result. Once you have identified the exact location to apply your emblem, place the CAR Motorsports Custom C5 Corvette Z51 emblem face down on a soft cloth and remove the adhesive protection paper. Carefully pick your emblem up by the edges and press the edges into place with constant even pressure. Finally press the entire emblem onto your beautiful performance suspension C5 Corvette using direct even pressure. Maximum adhesion will occur within 48-72 hours. Enjoy your work and the new overall appearance this premium quality emblem provides.

Testimonials and pictures are always welcomed. Please send your valued comments and pictures to: car@carmotorsports.com

$49.98 for two or more